How should a glass edge grinding machine be used?

With the development of science and technology, people can not only fully utilize the natural advantages of glass, but also adjust its properties to compensate for its defects.  Below, let's take a look at the usage of glass edge grinding machines and the processes required for glass production.

I. Precautions for using glass straight-line edge grinding machines:

The working method of straight edge grinding machines (straight edge machines, round edge machines, beveling machines) is to clamp the glass with the front and rear plates and drive its linear movement for grinding.Two points must be noted during use: ① Connection between the front and rear pressure plates and the glass.The mating surfaces of the guide rails should be lubricated frequently; otherwise, premature wear of the front and rear pressure plates and the guide rail working surfaces will affect the normal service life of the machine.Although some models have automatic lubrication devices, it is necessary to check whether the lubrication pipelines are unobstructed;② When clamping the glass, the clamping force should be appropriate.Too loose will affect the grinding quality.If it is too tight,The load on the machine will increase, and shaking and crawling phenomena are likely to occur.Thin glass is easily broken when grinding.Clamp a large piece of glass on the machine for testing. That is, clamp the glass in the middle of the machine. When the machine is stopped, move the glass with both hands and adjust the clamping force to the point where it cannot be moved when both hands are just closed.

II. Precautions for using glass irregularly shaped edge grinding machines

① The consistency of the suction cup height on the irregularly shaped machine's worktable has a great impact on the grinding effect.During assembly, the manufacturer has self-ground the five sets of suction cup seats and selected suction cup glue of the same thickness to maintain the consistency of the height of each suction cup.Therefore, under normal circumstances, do not disassemble or assemble the suction cups.If the suction cup glue is damaged, choose the same thickness to replace it.② After the irregularly shaped machine's vacuum pump has been used for a period of time, the vacuum degree decreases (i.e., the suction force decreases) due to water ingress and other reasons.'So pay attention to checking and troubleshooting, otherwise the machine will operate under insufficient suction,'

III. Precautions for using double-sided edge grinding machines

① Double-sided edge grinding machines are relatively inferior edge grinding machines.It is recommended to have two or three people operate it to ensure correct operation.② If errors or faults occur in the double-sided grinding process, it is recommended to ask the original manufacturer to send someone for repair and debugging.Generally, do not disassemble and repair it to avoid messing up the program and causing production downtime.

IV. Precautions for using shaping machines

① The mold of the touch machine has a great impact on the grinding accuracy.The working surface of the mold must have accurate shape and size, and the surface finish must be high.If the irregularly shaped mold is based on a template, the transition must be smooth.The suction cup working surface must be kept horizontal, otherwise it will affect the grinding quality.

In addition to the edge grinding machines introduced above, there are some edge grinding machines with simple structures and single applications, such as chamfering machines, small disc machines, polishing machines, etc. In addition, there are some special edge grinding machines used for processing certain products.  such as car rearview mirror edge grinding machines, washbasin edge grinding machines, etc.