Product Features Introduction

1. The intelligent detection table is used to detect the size of the glass, and the automatic adjustment of any size can be realized without manual input, which greatly improves the processing capacity of loose orders.

2. Using the structure of servo drive and high-precision ball screw, the opening and closing speed can reach 10m/min, and the opening and closing repeat positioning accuracy can reach +0.02mm.

3. Glass [4, 5, 6, 8 cm] edging amount is 3 mm, rough grinding and polishing processing speed can reach 20 m/min, and the production capacity is 5 times that of ordinary double-side machines;

4. Single-side 14 grinding head configuration: Diamond wheel, resin wheel and polishing wheel all adopt servo manual and automatic integrated automatic feeding. After the grinding wheel is worn out, it is automatically compensated. After the grinding wheel is completely worn, it will automatically alarm to replace the grinding wheel. No manual adjustment is required to ensure better edging quality.

5. Double-sided machine margin recognition function: also known as the secondary detection function, used to detect in real time when the actual margin of the glass exceeds the set value range (the glass size is oversized or the cut surface has a bevel). The automatic secondary detection will be monitored in real time. If the glass exceeds the edging position, it will automatically decelerate according to the margin to ensure the safety of glass edging.

6. Really solve the problem of fast edging and chipping: through the principle of high-speed motor and grinding head grinding method (angle) to reasonably distribute the position of the grinding wheel, to change the edging speed and chipping problem. [Really bid farewell to the slow edging speed and chipping problems of traditional high-speed edging machines].

7. The huge change in the structure of the Jinbo high-speed grinding head motor and the motor is that the rigidity is better and the problem of insufficient grinding force is changed.

8. Lower synchronous belt conveyor guide groove: It is an independent research and development invention. The difference from its counterparts is the structure and the use of 304 stainless steel material, high installation accuracy, greatly increasing wear resistance, and extending the service life of the synchronous belt and guide rail. It is 10 times the normal service life of its counterparts, and bid farewell to the shortcomings of traditional edging machines that are often replaced and not wear-resistant.

9. It can be connected with the loading and unloading table and the washing machine to realize an unmanned automatic production line, which greatly reduces the cost.

10. It is suitable for processing high-end furniture, fish tanks, display cabinets, shower rooms, construction, door and window glass and other processing fields.

• Double servo drive 
• Hand-automatic integrated structure with polished bottom edge 
• Upper chamfering hand-auto integrated structure 
• Hand-automatic integrated structure for rough grinding bottom edge 
• Chamfered hand-self integrated structure
• Film removal function (LOW-E glass)